President of Provincial Mechanical Engineering Society Non-destructive Testing Branch, Professor Zhu Pingyu of Guangzhou University, Shenzhen Zhongchang Li Bo The general manager and his party visited Shenzhen JEET Technology Co., Ltd. for guidance.

Among all the components of an industrial endoscope, the most intuitively seen by the customer is the screen. Sometimes the quality of the screen determines the main condition for purchasing an endoscope.

jeet videoscope

The industrial endoscope is a visual inspection equipment that integrates advanced technologies in various fields such as electronics, optics, and machinery. The front end can be bent and steered through the probe and the pipeline part, which can effectively extend the visual distance and change the direction of the line of sight.

Industrial endoscopes have a wide range of uses. They can be used to inspect the inner surface of industrial products, the inner surface of welds, the inner surface of pipes, the inside of equipment, as well as to inspect redundant objects, check operating conditions and quality control assembly.

The carbon deposits here are mainly concentrated in the following locations: around the blades, on the back of the blades, and at the idle motor. Carbon deposits can cause idling instability, idling jitter, high idling, stalling, hysteresis, misfire and other phenomena.

Today, with rapid changes, technology is also rapidly updated, and product iterations and enterprise development are closely related to technological progress. To build a corporate moat and maintain its long-term advantage in the market, technology research and development is undoubtedly extremely important.

Since the establishment of JEET Technology, the company has steadily developed technology, constantly insisted on independent innovation, and actively carried out endoscope product design and endoscope technology research.

With the development of science and technology and people's general emphasis on product quality, the scope of industrial endoscope testing has gradually expanded from the initial aerospace field to many other industrial fields, and runs through the entire process of production, manufacturing, quality inspection, and maintenance.

In the machinery manufacturing industry, industrial endoscope is often used to pursue product excellence. With the help of this special inspection tool, people can check whether the machine is worn more carefully.

Welding technology is an indispensable process in modern industry high quality and high efficiency manufacturing technology. The application of pipeline welding in many welding technologies is of great significance. Pipeline is used to transport various media. As special facilities, welding technology can be seen everywhere: power plant, shipbuilding, chemical company, pharmaceutical equipment, etc.

Nondestructive testing technology is an indispensable and effective tool for industrial development, which reflects the industrial development level of a country to a certain extent. As one of the basic technologies of modern industry, NDT technology plays an increasingly important role in ensuring product quality and engineering quality.

The quality control of casting industry is more and more strict, the requirements of castings are higher and higher, and the output is higher and higher. Traditional industrial endoscope can not meet the needs of detection.

Pipelines are widely used in petroleum, chemical, metallurgy, pharmaceutical, energy and environmental protection industries. In our daily life, tap water, optical cable, sewage, etc. They are closely related to underground pipelines. It can be said that pipelines are indispensable in urban life and industrial life.

We pipe water, gas, oil and so on every day. Pipelines are buried underground all year round, and when they fail, people don't know anything. Therefore, in order to better serve us, we have set up a pipeline endoscope, which is an auxiliary tool. Its purpose is only to detect the fault of the pipeline. If we want to repair the pipeline, we need professional personnel and equipment maintenance work.

With the development of the industrial endoscope industry, more and more capital has joined the social industry of China. There are more and more endoscope manufacturers, and consumers are faced with more choices from enterprises. How to choose reliable brands and products from many endoscope manufacturers has become a hot research topic.

With the development of industry, industrial endoscope is playing a more and more important role. What is industrial endoscope mainly used to detect? Next, jeet will join us.

As we all know, in the pharmaceutical industry, there are many pipelines in production, and the length of the pipeline is generally long, usually several meters or even tens of meters. Before the pipeline installation, it is necessary to check whether the welding is uniform and there are no defects. At this time, it is necessary to use the pipeline endoscope to take photos.

With the development of industry, more and more industries need to use industrial endoscope for nondestructive testing. What kinds of endoscopes can be divided into and how to choose industrial endoscope? Next, JEET will give you a brief introduction of industrial endoscope.

The pipeline endoscope is a kind of industrial endoscope which can be more inclined to the pipeline of the detection system. Its pipeline length is more suitable for the detection environment of the pipeline.

In the process of factory production, pipeline transmission is essential, so the daily maintenance is also a work that cannot be careless. But most of the pipes are slender, so it is impossible for human eyes to observe it. At this time, the pipe endoscope is needed to enter the pipeline to help the maintenance personnel work.

Industrial endoscope is a new nondestructive testing instrument which integrates optics, precision machinery, electronic machinery, electronic technology and micro camera technology. Traditional non-destructive testing methods can not detect non-point surface defects. Optical fiber is used to transmit illumination light, micro camera and video signal. After processing and amplification, the video signal is sent to the display for imaging.

Clean pipeline is an important part of medical equipment and technology, and it is an important carrier for the transmission of various media in the process of pharmaceutical production. During the construction of pharmaceutical engineering, the slight carelessness of pipeline welding may cause serious consequences.

With the increasing capacity of single unit of thermal power plant and the increasing pressure of boiler, in order to avoid the safety problems and economic losses caused by foreign matter plugging and explosion, the pipeline inspection in installation and operation of thermal power plant has higher requirements.

With the development trend of rail transit manufacturing industry, the maintenance quality and efficiency of rail transit vehicles and other mechanical equipment are required to be higher and higher. Due to the characteristics of industrial endoscope nondestructive testing technology, it has become an important testing tool in the industrial field

With the rapid development of industrial automation, robotics and other industries, the development of turbine and plug engine is also accelerating. Cylinder block is one of the most commonly used and important parts. Correct inspection and maintenance before leaving the factory can reduce the failure rate of cylinder block and improve its service life. It is very important for the normal operation of the whole equipment.

Thx series HD megapixel endoscope newly launched by Shenzhen JEET Technology Co., Ltd. has powerful features such as automatic white balance, manual white balance and manual exposure adjustment. It has a good processing effect for highly reflective workpieces and is no longer affected by reflective spots; For light absorbing objects, increase the exposure value to make the detected objects clearly visible. Worth recommending!

In the application of industrial endoscope, crack detection is one of its main applications. Because the probe diameter of the industrial endoscope is relatively small, it is easy to check the interior of the equipment through the slit or small hole, so that the tester can see the video image on the display, judge whether there are cracks, cracks and severity, and make correct replacement, maintenance or repair decisions.

Industrial endoscope is applied in the development, maintenance and repair of railway engineering vehicles and transport vehicles. How is industrial endoscope applied in the railway industry? JEET industrial endoscope today shares with you the specific application of industrial endoscope in railway engineering.

Industrial endoscope is a high-tech product based on nondestructive testing developed in petrochemical, industrial machinery, electrical and electronic, aerospace and other industries.

In the detection process of industrial endoscope, its implementation process is the result of the cooperation of multiple functional parts. Among them, the imaging clarity determines whether the defect can be found, and the guidance function affects the defect search speed. Probe guidance is very important to the detection efficiency, but sometimes the probe guidance becomes insensitive and inflexible in use.

As one of the important tools of nondestructive testing, industrial endoscope has very important applications in many industrial testing fields. As we all know, the probe is the core component of industrial endoscope, which is very expensive both in replacement price and maintenance cost. Therefore, the industrial endoscope probe must be used correctly. So how to protect the endoscope probe from damage in the detection process?

Industrial endoscope is an indirect visual inspection equipment, which widens the visual detection range of human eyes and breaks through the detection limit of human eyes.

When we purchase an industrial videoscope, light source，HD video，and durability is vital to choose an industrial videoscope. However, if you want to purchase a handheld industrial videoscope, please do not ignore the battery life, as it is one of the most important elements.

An industrial videoscope is used in railway engineering, such as railway engineering vehicle research and manufacturer, maintains, and other applications. How an industrial videoscope applied in railway industry, JEET does shares you in details as the following.

Casting test is an essential method to find out flaws, and ensure the product quality. Today，there are many methods NDT for casting, the most commonly used is magnetic powder inspection, flurescent penetrant inspection, ultrasonic test, radiographic inspection,etc

With the raising demands of industrial production and the rapid development of technology, industrial videoscope is more and more important in industrial production. An inspector is able to complete the inspection jobs more efficient and effective via correctly using a videoscope.
When an inspector uses a videoscope first time, he or she needs to finish a base operation training before inspection job. Take JEET T51X series videoscope as an example.

Shenzhen Jeet Technology Co., Ltd, known as JEET VIDEOSCOPE, is a high-tech enterprise, specialize in research and development, production,sales and inspection service of industrial videoscopes.