The F series is a high-definition industrial videoscope capable of 3D measurement developed by Jeet after years of careful research and development.

Industrial endoscopes have a wide range of uses, and can go deep into areas that cannot be directly seen by the human eye for surface observation.

Fluorescent penetrant detection technology is one of the main methods of non-destructive testing. and very fine cracks on the metal surface can be easily observed.

As we all know, industrial endoscopes can perform non-destructive testing without disassembling or destroying the assembly and equipment shutdown, improving work efficiency. Therefore.

Fiber optic endoscopes can be used in places where high temperature, toxic, nuclear radiation and some people cannot see with the naked eye, and can provide accurate detection without destroying or disassembling the instrument.

When used under normal conditions, the failure rate is actually very low, it is not easy to be damaged under normal conditions, and is completely different from other mechanical equipment. Therefore, after purchasing a relatively good-quality portable industrial endoscope.

During 1970-1980, my country introduced endoscope products from abroad. These products are mainly used for internal redundancy control of aviation products and quality inspection of certain parts. There are many types of instruments, and industrial endoscopes are one of them.

If a live object such as a high-voltage line is encountered during the inspection, the operator must first turn it off. Otherwise, the bare metal parts of the portable industrial endoscope will conduct electricity, leaving the user exposed and easily damaging the equipment. Do not use near high temperature or high heat source.

After more than 100 years of development, cars have become inseparable from the lives of modern people. Among the various parts of the automobile, castings are an important part of the automobile, from the chassis of the automobile to the engine, structural parts and safety parts, which are closely related to the production of die casting technology.

JEET Technology has been focusing on high-precision processing and packaging technology. The wall thickness of parts processing has reached a breakthrough of 3um, the processing depth of ultra-fine 0.2 hole has reached 1mm, and the surface finish of SUS316L stainless steel has reached 0.4.

An endoscope is a tool that can be inserted into an object for inspection and observation. To talk about its origin, it can be traced back to ancient Greece and ancient Rome. The original endoscope was a medical device used by doctors to observe the inside of the human body.

The industrial endoscope is divided into three parts, one is the host part, mainly used for storing software and viewing images, and has an insertion tube part. The length of the insertion tube ranges from one meter to several hundred meters. Different lengths correspond to different configurations.

As the market demand of the railway transportation industry continues to increase, the development of the railway industry is getting faster and faster. At the same time, the railway industry has also put forward higher requirements for the quality and efficiency of railway vehicle maintenance.

Olympus has played an extremely important role in the invention and creation of endoscopes in the world. As an imported brand of industrial endoscopes, Olympus endoscope has a minimum diameter of 2.4mm.

Since the endoscope has the measurement capability in the 1960s, the technical personnel of the endoscope have been studying more accurate measurement methods, and the accuracy of the 3D measurement is the constant pursuit of the research and development personnel.

Industrial endoscopes can be used for inspection and observation in places where high temperature, toxic, nuclear radiation and human eyes cannot be directly observed.

People who use cars generally know that the engine runs smoothly and saves fuel within two to three years before purchase and use. However, after a few years of use, some car owners will obviously follow the maintenance manual for standard maintenance, but many vehicles inevitably need to start.

With the continuous improvement of quality requirements for products and product accessories, as the last checkpoint of product or accessories forming: the quality control of pipes and pipe welds becomes particularly important. When the customer is facing the inner side of the pipeline or some complicated space that is difficult to inspect.

The 2.0mm industrial endoscope produced by JEET Technology has stable product quality, lightweight and portable design, and intuitive operation interface, which has won the love of many customers.

The use of industrial endoscopes requires sufficient experience to maximize the effectiveness of the tool, causing many causes of wear and tear. What condition can I say that there is a loss problem? That's what people want to know. If you want to be a good technician, you will need to undergo long training.

As a well-known domestic industrial endoscope brand enterprise, JEET Technology focuses on innovation and service, aiming to build a world-class industrial endoscope brand. The company's R&D personnel have gradually developed many new technical products, welcome to come advisory.

From October 15th to 17th, 2020, the 2020 China International Nuclear Power Industry and Equipment Exhibition and the 2020 China (Yantai) Nuclear Energy Safety and Nuclear Power Industry Chain Summit Forum were grandly opened at Yantai International Expo Center.

JEET Technology's F series endoscopes are developed based on Linux system, dual 1 million ultra-high pixel cameras to collect images, can be three-dimensional measurement, graffiti, WIFI image transmission, using the latest 8-core flagship CPU, 1080P high-definition IPS display, display The image is clearer.

In recent years, with the construction of industrial modernization, more and more electricity is used in all aspects of life, so the establishment of more substations has become a rigid need. The industrial endoscope is a kind of non-destructive testing equipment widely used in the field of industrial manufacturing and maintenance.

With the continuous development of the country and the improvement of people's living standards, people will add more auxiliary products in their daily lives, such as household machines such as air-conditioning, car washing machines, etc., to improve the quality of people's daily life. These auxiliary supplies have also led to the fact that the use of industrial endoscopes in daily life is becoming more and more common!

From October 28th to 30th, 2020, the 25th China International Quality Control and Testing Industrial Equipment Exhibition will be held on the first floor of the West Hall of Shanghai Everbright Convention and Exhibition Center. Shenzhen JEET Technology Co., Ltd.

Mobile phones, Bluetooth, WIFI, and NFC, indispensable tools for modern humans, have been bringing more gameplay to the use of mobile phones, and also making people's lives easier. As a mature technology, WIFI has been used by most people as a supplement to data traffic.

As we all know, welding is a common production process and plays a very important role in modern technology. For example, electricity, special inspections, machinery manufacturing, petrochemicals, aerospace, automobiles, etc. are all produced by welding.

The 59th (Autumn 2020) National Pharmaceutical Machinery Expo and 2020 (Autumn) China International Pharmaceutical Machinery Expo closed successfully on November 5, 2020.

Industrial endoscopes are similar in principle to medical endoscopes, but the raw materials and use environment are quite different. Medical endoscopes use natural holes in the human body or open several small holes when necessary.

When testing these special equipment, there may be some parts that cannot be directly observed by the naked eye, and the disassembly will require huge labor time and money. Therefore, at this time, it is necessary to use an industrial endoscope to detect blind areas that cannot be seen.

Hardware products are auxiliary and accessory finished products used in daily life and industrial production. According to the "Analysis Report on the Development Prospects and Investment Strategic Planning of China's Hardware Industry", in 2010, my country's hardware industry saw rapid recovery growth throughout the year.

The 10th China International Police Equipment Expo hosted by the Ministry of Public Security will be held at the Beijing National Convention Center from November 23 to 26.

When you are driving on the road, you will often see the white wind power generator set working day and night, and there is a tool that cannot be ignored when maintaining the internal gearbox and bearings of the wind power, that is, the industrial endoscope.

At present, domestic endoscopic inspection has entered the practical stage, and it is increasingly used in the quality control of product production process, and has developed into a conventional inspection method. The function and quality of the endoscope have become an important factor that distinguishes the major endoscope manufacturers.

From a functional point of view, industrial endoscopes are non-destructive testing equipment, which can complete the inspection of the internal space of the engine, gas turbine, pipeline, boiler and other equipment that cannot be observed by the naked eye without disassembling.

At present, the increasingly competitive auto repair shops and maintenance shops often encounter such a problem: When some cars are cleaned without disassembly, they can't directly show the improvement of car performance (except for exhaust gas testing).

Industrial pipeline endoscope is an NDT instrument that integrates light, machine and electricity into pipeline internal quality inspection, detection and analysis. The main configuration includes: camera probe, cable, imaging device.

As for which light source to choose, it depends on your budget and needs. The industrial endoscopes independently developed and produced by Jietai can be selected with front LED light source and rear fiber optic light source for selection, and can also be customized Diameter probes.

Our company is a national high-tech enterprise specializing in the development and production of high-definition industrial endoscopes, three-dimensional measuring endoscopes, automotive endoscopes, police endoscopes, hole detectors, pipe endoscopes and other endoscopes.